Dual-wavelength Erbium-doped fiber laser based on Erbium-doped Zirconia fiber
A. HAMZAH1,
M. C. PAUL2,
S. W. HARUN1,*
,
N. A. D. HURI1,
A. LOKMAN1,
R. SEN1,
M. PAL3,
S. DAS3,
S. K. BHADRA3,
H. AHMAD4
Affiliation
- Department of Electrical Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
- bFibre Optics Division, Central Glass and Ceramic Research Institute, 196, Raja S.C. Mullick Road, Kolkata 700 032, India
- Fibre Optics Division, Central Glass and Ceramic Research Institute, 196, Raja S.C. Mullick Road, Kolkata 700 032, India
- Photonics Research Center, University of Malaya, 50603 Kuala Lumpur, Malaysia
Abstract
We proposed a room temperature stable dual wavelength Erbium-doped Zirconia fiber (EDZF) based fiber laser using a polarization maintaining fiber(PMF) that cascaded with the polarization –insensitive 3dB coupler as the wavelengthselective filter in a ring configuration. Two simultaneous lasing lines at 1565.5 nm and 1567.2 nm were obtained by adjusting a state of polarisation inside the cavity with peak powers of 0.17 mW and 0.18 mW respectively at the maximum pump power of 120 mW. Both lasing lines have a signal to noise ratio of more than 30 dB and threshold pump power of about 30 mW. The fluctuation of wavelength and peak power is less than 0.1 nm and 0.1 dB over 1.5 hours, which indicates
an excellence stability of the proposed laser.
Keywords
Multi-wavelength laser, Erbium-doped Zirconia fiber (EDF), Dual-wavelength laser.
Citation
A. HAMZAH, M. C. PAUL, S. W. HARUN, N. A. D. HURI, A. LOKMAN, R. SEN, M. PAL, S. DAS, S. K. BHADRA, H. AHMAD, Dual-wavelength Erbium-doped fiber laser based on Erbium-doped Zirconia fiber, Optoelectronics and Advanced Materials - Rapid Communications, 4, 8, August 2010, pp.1099-1101 (2010).
Submitted at: June 25, 2010
Accepted at: Aug. 12, 2010